kkimmell
07-03-2008, 01:40 PM
I bought and downloaded InstantCake TWP for Series1 Standalone TiVo. I burned the disc and ran the setup and everything seemed to work fine.
It boots up and I see the green light go active on the network port so at a minimum the NIC is functioning. However I am unable to get any further than the attempt to dial out. It reports that the service is not available.
I have set the dialing prefix to ,#401 and tried setting the "detect dial tone" to both on and off to no avail.
My modem died years ago so I really don't have any other option aside from the NET card. Can anyone give me any pointers on what to try next?
Thanks,
kk
UPDATE: Solved - I opened the box back up and simply removed and reseated the TurboNET card and plugged everything back in.
It boots up and I see the green light go active on the network port so at a minimum the NIC is functioning. However I am unable to get any further than the attempt to dial out. It reports that the service is not available.
I have set the dialing prefix to ,#401 and tried setting the "detect dial tone" to both on and off to no avail.
My modem died years ago so I really don't have any other option aside from the NET card. Can anyone give me any pointers on what to try next?
Thanks,
kk
UPDATE: Solved - I opened the box back up and simply removed and reseated the TurboNET card and plugged everything back in.