TiVoWebPlus Channel List Error

[timl]

I used InstantCake and installed it on a 320G and into a DSR6000R01. I tested everything and all seemed well. I was able to adjust the dish and connect via ethernet and all the menus worked. Next I did something I didn't know would cause problems, installed it into my DirectTv subscribed DSR6000R01 receiver. I then found out that I needed to reset and clear. After this when I go to the web interface and try to bring up the channel list I get an error:

INTERNAL SERVER ERROR
--cut here--
action_channellist '/1' ''
can't open object (errDbNotFound)

while executing
"db $::db openidconstruction $::setupid [expr $chansub&0xfffffff]"
(procedure "loadStationData" line 2)
invoked from within
"loadStationData $fsid $chinfo(chansub) $rcv"
("uplevel" body line 2)
invoked from within
"uplevel $body"
invoked from within
"transaction {uplevel $body}"
(procedure "RetryTransaction" line 5)
invoked from within
"RetryTransaction {
set bdata [loadStationData $fsid $chinfo(chansub) $rcv]
}"
(procedure "getStationData" line 12)
invoked from within
"getStationData chinfo $fsid"
(procedure "ForeachChannel" line 26)
invoked from within
"ForeachChannel chinfo $type {

set logostr [getLogoTag $chinfo(logo) 1]
puts $chan [tr "" [td $logostr] [td $chinfo(num)] [td [html_link "/c..."
(procedure "MOD::action_channellist" line 31)
invoked from within
"$cmd $p1 $p2 $p3"
(procedure "do_action" line 19)
invoked from within
"do_action $action $chan $part $env 1"
--cut here--

Did the clear clean off something I needed?
How do I fix it.
I can use the remote and go into Messages & Settings|Settings|Channels and all my proper channels show up.

[Lou Jacob]

Did the clear clean off something I needed?
How do I fix it.
I can use the remote and go into Messages & Settings|Settings|Channels and all my proper channels show up.

If you just did a clear and delete everything, you've erased the database on your TiVo. Go through your guided setup again and after a few hours it should work fine - your unit needs to recollect data from the satellite and repopulate the database.

[timl]

If you just did a clear and delete everything, you've erased the database on your TiVo. Go through your guided setup again and after a few hours it should work fine - your unit needs to recollect data from the satellite and repopulate the database.

I did a Guide Setup, TiVo asked me to after the reboot. It has been several hours (more than 12).

The guide has downloaded and is working from the remote and visible from the screen. It is just not working from TWP, I get that error screen. I have been able to enter Season Passes and they are starting to work.

Thanks for your quick response.

Tim