I'm trying to create a new upgraded DTV TIVO HD (HR10-250 /v.6.3d-01-2-357),using PTVnet. The PTVnet flags don't get set, as I receive the following error msgs for all subsequent flag settings:

touch: /mnt/tivo/init/ptv_flags/STATIC_OFF: No such file or directory

I had CD-ROM as Secondary Slave (Hdc) & HD as Primary Master (hda) connected.

I can see the drive mounted at hd7 from the shell using DF command.

I have tried this on two platforms: Dell and Gateway to see if the bios makes a difference.

Sounds like bios is assigning my HD as hdc7 vs just hda, so maybe PTVnet can't find it. I have to set my BIOS as auto otherwise the HD doesn't get recognized. The question is, how do I tell PTVnet to use hdc7 rather that hda?

Thanks for any help.