PTVNET + Trendnet TU2-ET1OO = No Luck yet

[elmofongo]

Howdy,

After installing PTVnet I plugged in my Trendnet USB (same one sold on this web site) and I'm getting the following console output before the DirecTivo reboots :

hub.c: port 1, portstatus 501, change 1, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 511, change 0, 480 Mb/s
hub.c: port 1, portstatus 503, change 10, 480 Mb/s

usb.c: USB device 2 (vend/prod 0xb95/0x7720) is not claimed by any active driver
.
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
hub.c: port 4, portstatus 100, change 0, 12 Mb/s
hub.c: port 5, portstatus 100, change 0, 12 Mb/s
Unable to handle kernel paging request at virtual address 00000090, epc == c01bb
f8c, ra == c01bbf7c
Oops in /build/sandbox-b-7-2-2-mr-release-mips-other/b-7-2-2-mr/os/linux-2.4/arc
h/mips/mm/fault.c::do_page_fault, line 395:
Kernel panic: Die called

Core of 0 bytes written
Panic logged
Rebooting in 1 seconds..


Any pointers would be appreciated.

-Adriano

[pete1606]

One more thing I also forgot to mention that once you upgrade you need to put in the following phone dialing prefix in order for it to work #401


Peter