Results 1 to 2 of 2

Thread: Slicer failed on Samsung SIR-4080

  1. #1

    Slicer failed on Samsung SIR-4080

    I downloaded and ran slicer 1.9 on my hacked Samsung SIR-4080. I had version 6.2 running and I was upgrading to 6.4a. The script ran fine and everything looked good until the unit rebooted. I ran in to a problem, here is the section of the log I believe is the problem:

    Starting TvLauncher
    assert: Tmk Assertion Failure:
    assert: TmkServer, line 379 ()
    Tmk Fatal Error: Activity TvBusProxy <106> strayed!
    Paste the following into a shell to get a backtrace...

    bt -t /tvbin/tivoapp < tcd 1
    hpk Series2
    build b-6-4-prod @299218 2008.05.08-0010 release-mips []
    pack 6.4a-01-2
    read 0x00400000 /tvbin/tivoapp
    read 0x02000000 /lib/libc.so.6
    read 0x02200000 /lib/libm.so.6
    read 0x02400000 /lib/libpthread.so.0
    read 0x02600000 /lib/libutil.so.1
    read 0x02800000 /lib/libtvutil.so
    read 0x02a00000 /lib/libtmk.so
    read 0x02c00000 /lib/libtvstructures.so
    read 0x2aaa8000 /lib/ld.so.1
    read 0x2ab04000 /lib/libhpkoss.so
    read 0x2ab50000 /platform/lib/libhpkhl.so
    read 0x2ac18000 /platform/lib/libhpkll.so
    read 0x2ac5c000 /lib/libdl.so.2
    read 0x2aca0000 /lib/libcdaudio.so
    0x02a7e47c 0x02a826d4 0x02a24620 0x02a4fdcc 0x006922b4 0x02a28c08 0x02a28834
    0x02a6069c 0x02a2871c 0x02a28630 0x02a2b03c 0x02a3c684 0x02a3c56c 0x02a3c41c
    0x02a3b978
    END_OF_BT

    Tmk Fatal Error: Activity TvBusProxy <106>: assertion failure
    Waiting for launcher to start.
    Launcher is running.
    Scanning for phase2 repair scripts
    Running boot Stage E_PreApplication scripts
    Checking for database conversions
    flushing ide devices: hda
    Restarting system.

    Can someone tell me what went wrong?

  2. #2
    no takers?

    Running Slicer hosed my install so I ended up restoring the drive using mfstools using an image from one of my other tivos. After I got this all up and running, I ran slicer again. I ended up with the same exact problem... slicer seemed to run fine, but when rebooting in to 6.4a, I ended up with this error.

    I am wondering if maybe it has to do with a patched tivoapp? It was so long ago that I hacked these units, I don't remember exactly what I did (I did not hack with zipper). But it looks like it is the tivoapp that is crashing... any thoughts?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •