Slicer failed on Samsung SIR-4080
I downloaded and ran slicer 1.9 on my hacked Samsung SIR-4080. I had version 6.2 running and I was upgrading to 6.4a. The script ran fine and everything looked good until the unit rebooted. I ran in to a problem, here is the section of the log I believe is the problem:
assert: Tmk Assertion Failure:
assert: TmkServer, line 379 ()
Tmk Fatal Error: Activity TvBusProxy <106> strayed!
Paste the following into a shell to get a backtrace...
bt -t /tvbin/tivoapp <
build b-6-4-prod @299218 2008.05.08-0010 release-mips 
read 0x00400000 /tvbin/tivoapp
read 0x02000000 /lib/libc.so.6
read 0x02200000 /lib/libm.so.6
read 0x02400000 /lib/libpthread.so.0
read 0x02600000 /lib/libutil.so.1
read 0x02800000 /lib/libtvutil.so
read 0x02a00000 /lib/libtmk.so
read 0x02c00000 /lib/libtvstructures.so
read 0x2aaa8000 /lib/ld.so.1
read 0x2ab04000 /lib/libhpkoss.so
read 0x2ab50000 /platform/lib/libhpkhl.so
read 0x2ac18000 /platform/lib/libhpkll.so
read 0x2ac5c000 /lib/libdl.so.2
read 0x2aca0000 /lib/libcdaudio.so
0x02a7e47c 0x02a826d4 0x02a24620 0x02a4fdcc 0x006922b4 0x02a28c08 0x02a28834
0x02a6069c 0x02a2871c 0x02a28630 0x02a2b03c 0x02a3c684 0x02a3c56c 0x02a3c41c
Tmk Fatal Error: Activity TvBusProxy <106>: assertion failure
Waiting for launcher to start.
Launcher is running.
Scanning for phase2 repair scripts
Running boot Stage E_PreApplication scripts
Checking for database conversions
flushing ide devices: hda
Can someone tell me what went wrong?
Running Slicer hosed my install so I ended up restoring the drive using mfstools using an image from one of my other tivos. After I got this all up and running, I ran slicer again. I ended up with the same exact problem... slicer seemed to run fine, but when rebooting in to 6.4a, I ended up with this error.
I am wondering if maybe it has to do with a patched tivoapp? It was so long ago that I hacked these units, I don't remember exactly what I did (I did not hack with zipper). But it looks like it is the tivoapp that is crashing... any thoughts?